Pattex Sekundenkleber Pattex Mini Trio Gel 3 x 1g

Product information "Pattex Superglue Pattex Mini Trio Gel 3 x 1g" 

Pattex Superglue Ultra Gel Mini Trio 

The tried and tested extra strong and flexible Pattex Ultra Gel formula is now also available in practical 1g tubes. Its unique gel formula makes it particularly suitable for porous materials and vertical surfaces. With its optimal quality for every application, it is always where you need it. 

Product features: 

Conveniently portioned 3 x 1g tubes - can be stored in different places 3x always fresh superglue 

Extra strong and flexible 

Vibration-damping 

Shock and water resistant 

Gel-like, so no dripping 

Particularly flexible thanks to the patented Henkel formula with micro rubber particles 

Break-proof - even under sudden loads 

Can also be used for materials with slight material unevenness and on vertical surfaces 

Solvent-free 

Contents:

Available as 3 x 1g tubes. 

Storage: 

Store the adhesive in a cool, dry place to extend its lifespan. 

Application: 

1. All surfaces to be bonded must be clean (clean beforehand if necessary, provided the nature of the material allows it), dry and as close to the surface as possible.

2. To open the tube, screw the entire cap tightly onto the tube. Remove the top cap for further use. Apply the superglue to one side of the surface.

 3. Press the parts together immediately, holding for approx. 30-60 seconds, depending on the material. 

4. Allow to harden for at least one hour. 

5. The best results are achieved when the adhesive is used at room temperature (15-30°C). 

After use, you should close the product again immediately. 

Areas of use: 

Pattex Ultra Gel Mini Trio offers adhesion in seconds for precise and diverse bonding on porous materials and vertical surfaces. It is extremely strong and flexible and is suitable for: 

Small repairs 

Fastening small objects 

Handicrafts Areas of application:

 Porcelain Metal Rubber Leather Wood Paper Plastic* * 

Not suitable for PE, PP, PTFE, Styrofoam®, flexible PVC etc. 

Superglues such as Pattex Superglue Power Easy Gel, Liquid, Glass Liquid and Plastix Liquid as well as Pattex Superglue Ultra Gel are very difficult to remove. The basis of all these adhesives is a cyanoacrylate. 

What you need: 

Penetrating oil (e.g. cooking oil) 

Cleaning agent for textiles 

Hot water bath with washing-up liquid (e.g. Pril) 

Soapy water 

Oily skin creams 

And this is how it's done: 

Removing superglue from textiles 

There is no panacea for removing superglue (cyanoacrylate) from textiles. In fact, the options are very limited. What you can try is to soften the stain with a penetrating oil (cooking oil). To do this, soak the stain in the oil for a longer period of time. After that, it should be easier for you to mechanically remove the superglue from the fabric. You should then clean the fabric several times by hand and with an appropriate detergent according to the manufacturer's instructions in order to completely remove the adhesive residue and oil from the fabric. Another option is to soften the superglue in a hot water bath (over 80°C) for a longer period of time. This should also soften the adhesive layer, making it easier to mechanically remove the adhesive residue.

Removing superglue from the skin 

First of all, superglue is not dangerous for the skin. Unless you have just stuck your fingers together, you can rest assured. The superglue reacts very quickly with the skin's moisture and a film forms that can tighten the skin. Without treatment, however, the superglue will come off again after 2 days at the latest due to the skin's moisture or sweat. 

If you want to speed up the process, we can recommend that you soak your fingers in warm soapy water and slowly rub off the adhesive residue. Applying a greasy skin cream to the edge of the bond can also be helpful. This can help the bond to soften at the edge and gradually come off. 

Removing superglue from other materials 

The same remedies as described above actually apply to other materials. When using acetone, however, you should pay attention to its compatibility with the surface, as the solvent is very aggressive.