TRY OUT

stretcher bar K35 ( 2.0 x 3.5 cm )

Size: 18cm

profile: 2.0 x 3.5 cm side length 15 - 160 cm custom formats possible on request `sharp edge' possible on request The K35 has a profile of 2.0 x 3.5 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 15 to 160 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a round edge. If you wish a 'sharp edge', it is possible against a surcharge of 5 euros per bar.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The pine wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/910/wedges-standard-pine/keys-100pcs?number=10864 If you require an additional bracing, please combine the frame with the cross bars K35: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/34/keilrahmen-mittelstueck-k35-1-8x3-5cm?number=10034The stretcher frame has a 1-fold slit from a side length of 50 cm.Advice on bracing:Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross).

Content: 0.15 Laufende(r) Meter (€1.07* / 1 Laufende(r) Meter)

€0.16* €0.23* (30.43% saved)

Details

stretcher bar K2065 ( 2.0 x 6.5 cm )

Size: 25cm

profile: 2.0 x 6.5 cm side length 25 - 400 cm custom formats upon request ´sharp edge´ upon request from 2 m 2-fold slit only available on order, e.g. by e-mail The K 2065 has a profile of 2.0 x 6.5 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 25 to 400 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a round edge. If you wish a 'sharp edge', it is possible against a surcharge.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The hard wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order for the stretcher bars and the cross braces https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/991/wedges-big-beech/keys-50pcs.?number=10939 If you require an additional bracing, please combine the frame with the cross bars K2065: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/2342/stretcher-bar-k60?number=12239 The stretcher frame has a 1-fold slit from a side length of 50 cm up to a side length of 195 cm and a 2-fold slit from a side length of 200 cm.Advice on bracing:Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross). Please select the appropriate number of middle bars.

Content: 0.25 Laufende(r) Meter (€3.64* / 1 Laufende(r) Meter)

€0.91* €1.19* (23.53% saved)

Details

stretcher bar K30 ( 3.0 x 4.5 cm)

profile: 3.0 x 4.5 cm side length 20 - 300 cm custom formats possible on request `sharp edge' possible on request The K30 has a profile of 3.0 x 4.5 cm. We use seasoned and kiln-dried pine for the stretcher frame. The wood is finger-jointed to prevent the natural tendency of the wood to warp and, thanks to multiple gluing, is almost free of warping- a high-quality handcrafted product at an extraordinarily affordable price.The stretcher frame is available from a side length of 20 to 300 cm. We will be happy to cut the frame to your desired format for an additional charge of 5 euros per bar. Please note that the cross bars must also be cut to size.The stretcher frame has a round edge. If you wish a 'sharp edge', it is possible against a surcharge of 5 euros per bar.In order to obtain a stretcher frame, you need two stretcher bars of the long side, two of the shorter side and optionally a middle piece or cross and wedges.The pine wood wedges necessary for wedging (2 pieces per bar and middle bar) are not included in the price. Please order https://peters-art.de/de/malgruende/keilrahmen/holz-keilrahmen/910/keile-standard-kiefer-100-stueck?number=10864 If you require an additional bracing, please combine the frame with the cross bars K30: https://peters-art.de/en/painting-supports/stretchers/wooden-stretchers/32/keilrahmen-mittelstueck-k30-1-8-x-4-5cm?number=10032The stretcher frame has a 1-fold slit from a side length of 50 cm up to a side length of 195 cm and a 2-fold slit from a side length of 200 cm.Advice on bracing:Under a side length of 1m no middle bars are needed. If one side length exceeds 1m, one middle bar of the shorter side length is sufficient.If both sides are more than 1m long, you need one bar per side length (a simple cross). If one side is more than 2m long, you need two middle pieces of the shorter side and one of the long side (single double cross). If both sides are more than 2m long, the stretcher bars are each double slotted, so you need two middle bars per side length (double double cross).

Content: 1.85 Laufende(r) Meter (€1.54* / 1 Laufende(r) Meter)

From €3.08*

Details

TRY OUT Textil Bundle / Test canvas

TRY OUT Bundle: Primed Cotton

A convenient way to get to know our fabrics, test our quality and find your favorite textile.Contents: The bundle primed cotton contains approx. 10 samples, height 20 cm - 60 cm, diameter approx. 20 cm. The package unprimed cotton contains about 5 samples, dimension (WHT) 30cm x 20cm x 30cm. The bundle of unprimed linen contains approx. 5 samples, height 20 cm - 60 cm, diameter approx. 20 cm. The bundle of primed linen contains approx. 10 samples, height 20 cm - 60 cm, diameter approx. 20 cm.

€12.00*

Details

TRY OUT plastic canister natural 5 liters with screw cap 35 mm red

Detail description plastic canister Plastic canister equipped with a scale to read the level of 1 - 5 liters. Empty 5 liter plastic canister can be used for a variety of filling goods, this canister is also approved for food and is therefore food safe. Due to its properties, the canister is good to use as a water canister. This plastic canister is not stackable! This canister is good residue emptying. No UN test Detail description closure: Screw cap 41.3 x 4 red with originality and sealing cone.

€2.50* €4.90* (48.98% saved)

Details

cross brace K35 (1,8 x 3,5 cm)

Size: 45cm

from 50 cm lengthone slit, i.e. a middle bars or a cross: from 2 m lengthtwo slots,i.e. two middle bars per side or a double double cross: Depending on the length, the centre pieces either have no slot at all (shorter than 50 cm length), only one slot (from 50 cm length) or 2 slots (from 2m length). Accordingly, further middle pieces should be added so that 2 of them interlock at each slot, forming a cross and thus stabilizing the frame. Matching slots are worked into the wedge frames to anchor the ends of the corresponding centre pieces there.

Content: 0.45 Laufende(r) Meter (€0.93* / 1 Laufende(r) Meter)

€0.42* €0.59* (28.81% saved)

Details

TRY OUT Dibond-Platten

TRY OUT DiBond: 18 x 40 cm

4 mm thick aluminium composite panel, suitable for various purposes

€3.00*

Details

TRY OUT Keilrahmen

TRY OUT ARTIKEL: 80 x 140cm, K30 (3,0 x 4,5cm)

TRY OUT Hier bieten wir euch komplette Rahmensätze an, je nachdem mit und ohne Mittelstücke, Kreuz oder Doppelkreuz. Klasse C-Ware

€10.00* €25.17* (60.27% saved)

Details

TRY OUT Stretcher Corte stretched by machine

TRY OUT Bespannte Keilrahmen: 75 x 75 cm Corte

covered with 100% cotton primed with gesso 3 x primed 322gsm 2 cm deep, rounded edge

€12.00* €15.00* (20% saved)

Details

TRY OUT Jacquard Pinata Alcohol Ink 118ml

Jacquard Alco Ink: Mantilla Black #31

Piñata Alcohol Ink Piñata Colors are highly saturated, fast-drying alcohol inks for any hard surface, including glass, metal, plastic, ceramic, stone, leather, resin, YUPO, polymer clay and more. Indelible and impervious to water, Piñata Colors clean up with alcohol and re-wet themselves, allowing for unique effects and techniques not easily achieved with water-based inks. As a dye-based, highly transparent ink*, Piñata Colors are unparalleled for vibrancy. Only the most lightfast dyes have been selected for the palette. Acid-free with excellent adhesive properties, Piñata Colors are the go-to inks for all non-porous surfaces. TECHNIQUESfine arts, scrapbooking, crafts, faux stained glass, card making, resin arts, faux finishing techniques and staining wood and leather SURFACESglass, metal, plastic, vinyl, ceramic, stone, leather, epoxy resins, YUPO®, foil, wood, encaustic, clayboard, fiberglass, acrylic, polymer clay and more

Content: 0.118 Piece (€87.29* / 1 Piece)

€10.30* €12.90* (20.16% saved)

Details

TRY OUT PE-Schaumfolie (Nopschaum) 125m breit

TRY OUT ARTIKEL: 125 cm x 2,2 m, 2 mm stark

Nopschaum 1,25m breit

€1.50* €1.90* (21.05% saved)

Details

TRY OUT Klapprahmen Aluminium 30cmx40cm

Außenmaße 30x40 cm Innenmaße 28 x 38 cm 2 cm Aluminiumrahmen massiv, als Quer- oder Hochformat anwendbar Klasse C-Ware

€15.00* €19.90* (24.62% saved)

Details

TRY OUT aluminium and wood combo frame

Profil 3,2 x 6,0 cm, Nr.3060 ATTENTION: We only offer frames to customers ordering in Berlin for delivery in Berlin and for to be collected by the customer.* profil 3,2 x 6,0 cm, No. 3260 Our aluminium and wood combo frame is an answer to the demand of our customers for a particularly stable solution for large formats. In years of dialogue with our customers, we have developed a unique product that meets the demand for optimum stability, precise stretching and, at the same time, easy handling thanks to its particularly low weight.The frame is made of 100% solid aluminium and a wooden strip on the back, which makes a simple covering with different painting grounds possible. Each frame has a corner reinforcement as standard and, depending on the size of the frame, is additionally reinforced with a centre piece, a single cross or a double cross. All the advantages of our aluminium- wood- combo-frames at a glance: optimal stability distortion-free under unfavourable room, transport and storage conditions particularly low weight: easy to transport and handle precise and easy retensioning with an allen key longevity easy to cover thanks to the wooden strip on the back side *Unfortunately it is not possible for us to send finished frames. Therefore, when ordering within Germany or Europe, you will receive the aluminum frames as individual stretcher bars for self-assembly.

From €250.00*

Details

TRY OUT wood framing/floating frames

A floater frame is a picture frame that leaves a small gap between the canvas and the frame to enhance the effect of the picture. It is ideal for framing stretched stretcher frames, which are usually used for oil paintings. The floating frame frames the picture with a 5 mm or 10 mm gap. Meranti wood Delivery without glass and rear wall (empty frame) if desired, the picture can also be mounted in the frame

From €120.00*

Details